Product Description

ARAKAT CERAMIC is a hybrid system acrylic binder based primer specially developed for smooth surfaces such as ceramics and tiles. It is also used to increase adherence and working time before cement and gypsum based plaster.

Technical Specifications

• Category: Water Based - Interior
• Application Areas: Ceramics, tiles, exposed concrete, walls and ceilings

Expenditure

Depending on surface absorbency:

• With 1 kg: 4-6 m² of surface can be primed.

For exact consumption, it is recommended to apply on the surface.

Thinning

It is ready to use and does not require thinning.

Application Instructions

1. Make the surface solid, clean, dry and dust-free.
2. Completely clean any residue such as oil, dirt, rust, paraffin on the surface.
3. Apply the primer to the previously prepared surface with a specially textured roller.
4. After the primer has dried (24 hours on average), proceed with the application of ceramic adhesive, cement plaster or gypsum-based plasters.

Drying Time

• Touch Dry: 1-2 hours
• Hard Dry: 24 hours

Storage and Shelf Life

It can be stored for 2 years in its unopened original packaging, in a cool, dry place, protected from direct sunlight and frost.

Things to Consider

• It should be mixed in its packaging before use until it reaches the appropriate consistency.
• At least 4 weeks must be waited for the exposed concrete and raw plaster surfaces to dry.
• The surface temperature during application should be between +5 °C and +30 °C.
• The relative humidity in the air should be below 50%.
• It should not be used on exterior surfaces and rough plaster applications.

Hazard and Precautionary Statements

• EUH208: The mixture contains substances which may cause an allergic reaction.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P404: Keep in closed container.
• P410: Protect from sunlight.