Product Description

BINDER is a silicone-based concentrated isolating primer based on acrylic copolymer emulsion binder, unfilled and transparent in appearance. It can be used safely on absorbent and dusty weak surfaces such as satin plaster and plasterboard.

Technical Specifications

• Dry Film Appearance: Transparent
• Density: 1.01 ± 0.02 g/ml
• Solid Content: 34 ± 1% (by weight)
• Viscosity: 95 ± 5 KU
• Color: Colorless

Expenditure

Depending on the absorbency of the surface, 50-60 m² of surface can be primed with 1 litre in a single coat. It is recommended to test the surface for exact consumption.

Thinning

It is applied by diluting with 7 times water by volume.

Application Instructions

1. The surface must be solid, clean, dry and dust-free.
2. Exterior surfaces should be smoothed with "Eurosilex Putty", interior surfaces should be smoothed with satin plaster or interior wall putty.
3. The primer is applied in a single coat by brush, roller or spray.
4. The dilution ratio should be 1/7 (7 times water).

Drying Time

• Drying Time: 8-10 hours

Storage and Shelf Life

It can be stored for 3 years in its unopened original packaging, in a cool and dry place, protected from frost and direct sunlight.

Things to Consider

• It should be mixed in its packaging before use until it reaches the appropriate consistency.
• The surface temperature during application should be between +5 °C and +30 °C.
• Application should not be done in very strong winds or direct sunlight.
• Newly plastered surfaces should be allowed to dry for at least 4 weeks.
• After application, precautions should be taken considering the possibility of rain.

Hazard and Precautionary Statements

• EUH208: The mixture contains substances which may cause an allergic reaction.
• P102: Keep out of reach of children.
• P103: Read label before use.
• P404: Keep in closed container.
• P410: Protect from sunlight.