Skip to product information
1 of 1

İshakol Hydroflex Elastic Exterior Wall Coating White 20 KG

İshakol Hydroflex Elastic Exterior Wall Coating White 20 KG

Regular price 2,742.00TL
Regular price Sale price 2,742.00TL
Sale Sold out
Taxes included. Shipping calculated at checkout.

Product Technical Data Sheet

Safety Data Sheet

HİDROFLEX - Elastic Exterior Wall Coating

Protective exterior cladding that is not affected by building movements with its elastic structure and decorative appearance.

Product Description

HİDROFLEX is an acrylic copolymer emulsion binder based, silicone based, silky mat elastic exterior coating. It is safely used as a decorative and protective agent on plaster, concrete, brute concrete, gas concrete, brick and all mineral surfaces on the exterior facades of buildings. Thanks to its special elastic binder structure, it is not affected by small-scale building movements and capillary plaster cracks.

Technical Specifications

  • Dry Film Appearance: Semi-Matte, Grainy, Opaque
  • Density: 1.47 ± 0.02 g/ml
  • Solid Content: 64 ± 1% (by weight)
  • Viscosity: 4000-7000 Poise
  • Color: White

Expenditure

Depending on the surface smoothness:

  • With 1 kg: 1.5-3 m² surface can be covered.

For exact consumption, it is recommended to apply on the surface.

Thinning

It is ready to use, if necessary it can be diluted with water at a maximum of 5% by weight.

Application Instructions

  1. The application surface must be solid, clean, dry and dust-free.
  2. Necessary areas should be puttyed with "Eurosilex Putty".
  3. Glassy and shiny surfaces must be sanded to ensure the coating adheres.
  4. Raw surfaces should be primed with "Eurosilex Primer".
  5. On weak and absorbent surfaces, first "Binder" and then "Eurosilex Primer" should be applied.
  6. The coating is applied in a single layer with a roller suitable for the desired pattern, at least 24 hours after priming.

Drying Time

  • Hard Dry: 24 hours

Storage and Shelf Life

It can be stored for 3 years in its unopened original packaging, in a cool, dry place, protected from direct sunlight and frost.

Things to Consider

  • It should be mixed until it reaches the appropriate consistency before use.
  • The surface temperature during application should be between +5 °C and +30 °C.
  • Application should not be made in strong winds or in direct sunlight on very hot days.
  • On newly plastered surfaces, at least 4 weeks must be allowed for the plaster to dry before applying the coating.
  • Precautions should be taken considering the possibility of rain after application.
  • To avoid tone differences, productions with the same batch number should be used.

© 2025 Boya.net. All Rights Reserved. | TS 7847 Compatible

View full details