Product Description

PRECAST SURFACE PRIMER is a special synthetic resin based, solvent based primer. It has a matte and white appearance. It is used safely in the interior and exterior of buildings, especially on precast concrete surfaces, brick, exposed concrete, betopan, putty surfaces, glass fiber reinforced surfaces and raw plastered surfaces to ensure good adhesion of the final coat of paint to the ground.

Technical Specifications

• Dry Film Appearance: Matte, Opaque
• Density: 1.44 ± 0.02 g/ml
• Solid Content: 73 ± 1% (by weight)
• Viscosity: 90 ± 5 KU
• Flash Point: 42 °C
• Color: White

Expenditure

Depending on the surface and application method, 8-10 m² of surface can be primed with 1 litre in a single coat.

Application Instructions

1. The surface to be applied must be cleaned of oil, rust and swollen residue.
2. The surface must be dry, clean and self-supporting.
3. Correct the necessary areas with cement-based materials or "Eurosilex Putty" and prime again after drying.
4. Apply the primer in a single coat by brush, roller or spray.
5. The product is ready to use, but can optionally be diluted with 5-10% synthetic thinner.

Drying Time

• Final Coat Application: Can be done 24 hours after primer application.

Storage and Shelf Life

It can be stored for 5 years in its unopened packaging in a cool, dry environment protected from direct sunlight.

Things to Consider

• It should be mixed in its packaging before use until it reaches the appropriate consistency.
• The surface temperature should be between +5 °C and +30 °C.
• Sanding must be done on glassy surfaces in order for the paint to adhere.
• The product should not be applied directly onto EPS.